What anti mold suggestions do we have?

1. Clean stainless steel products for anti mold treatment:

Some finished and semi-finished products may develop mold after being stored for about a week during the rainy season. In this case, it is recommended to add water-based mold inhibitors during the final cleaning process of stainless steel products

In the cleaning water, add and stir evenly, and clean the stainless steel products according to the normal process.

2. Anti mold treatment can also be done during packaging

a. Directly use anti mold non-woven bags to package stainless steel products, and then put an appropriate amount of anti mold desiccant in the bag. Choose different specifications of anti mold desiccants according to the packaging size.

Alternatively, choose an anti mold bag that absorbs moisture while releasing anti mold factors for sterilization.

b. Place strong anti mold and deodorizing tablets in the outer box of the packaging according to the size of the space.

3. Warehouse environment control

a. It is recommended to pack the stainless steel products and store them in the warehouse. Do not stack them directly on the ground, use pallets to separate them, and do not place them too close to the wall. It is recommended to maintain a distance of 15-20cm,

Properly reserve channels to allow air circulation, otherwise vortices will be generated, leading to the formation of water vapor.

b. During the rainy season, it is recommended to sterilize the warehouse by spraying anti mold and antibacterial agents on walls, doors, windows, shelves, and other areas. When mopping the floor, add 5% anti mold and antibacterial agent to the water.

c. Install a temperature and humidity meter. When the humidity outside the warehouse is higher than the humidity inside, close the doors and windows. Otherwise, open them for ventilation.

4. Transportation control

a. Check if the container is leaking water.

b. Stainless steel products exported by sea, special attention should be paid to container moisture, and a drying rod can be hung on the container.

c. Clean the container before loading.